HOME PRODUCT Cisco Cards Cisco Port Adapter SPA-8XCHT1/E1
Categories
SPA-8XCHT1/E1
SPA-8XCHT1/E1

SPA-8XCHT1/E1

Product ID : Shared Port Adapter
Product Description

Manufacturer Part#: Cisco SPA-8XCHT1/E1 
SPA-8XCHT1/E1  CISCO ROUTER MODULE

In stock and ready to ship

Cisco 8-Port Channelized T1/E1 SPA provides one of the greatest densities currently offered in the industry at 8 ports per SPA and up to 32 ports per SIP. At a cost per T1/E1 port less than that of a standard serial port with external channel service unit/data service unit (CSU/DSU), the Cisco 8-Port Channelized T1/E1 SPA is cost-effective for all WAN connectivity.
The SPA is designed to provide a full 8-port channelized solution for the Cisco 6500,7600 and the 12000 Series Routers. The interfaces can be channelized, fractional, or unframed (E1) with up to 256 independent High-Level Data Link Control (HDLC) channels definable for T1 and E1 applications. With these capabilities, the SPA eliminates the need for separate interface types for separate connection requirements.
Multilink Point-to-Point Protocol (MLPPP) is supported (in hardware) to enable link aggregation greater than T1 capacity. Up to eight individual T1s can be combined within a multilink bundle that appears to be a single IP link. This enables service providers to provision greater-than-T1 bandwidth incrementally, without requiring migration of the circuit and customer premises equipment (CPE) infrastructure to T3 facilities.
The Cisco 8-Port Channelized T1/E1 SPA is hot-swappable and supports service-transparent online insertion and removal (OIR), allowing removal of the SPA without impacting the interface processor and other SPAs.


The Cisco 8-Port Channelized T1/E1 SPA is ideal for service providers and large enterprises looking to cost-effectively deploy high-density terminations of multiple remote sites (Figure 2). The SPA helps enable applications that require remote and branch-office locations to be terminated on a single router in a corporate enterprise network. For service provider applications where only DSU functions are required (for example, at sites colocated with a carrier), the Cisco 8-Port Channelized T1/E1 SPA provides high port density at a reduced cost per port. For E1 applications, the channelized E1/G.703 interface allows direct connectivity to 120-ohm G.703 lines.

Cisco SPA-8XCHT1/E1 General Information:
Manufacturer: Cisco Systems, Inc 
Brand Name: Cisco 
Product Name: 8-Port Channelized T1/E1 Shared Port Adapter 
Product Type: Shared Port Adapter 
 
Cisco SPA-8XCHT1/E1 Interfaces/Ports  
Interfaces/Ports: 8 x T1/E1 
Interfaces/Ports Details: 8 x RJ-45 T1/E1  
 
Cisco SPA-8XCHT1/E1 Media & Performance 
Connectivity Media: 120-ohm STP 
Connectivity Media: 100 ohm STP 
Data Transfer Rate: 1.536Mbps T1 per Port 
Data Transfer Rate: 2.048Mbps or 1.984Mbps E1 per Port  
 
Cisco SPA-8XCHT1/E1 Management & Protocols 
Management: SNMP 
 
Cisco SPA-8XCHT1/E1 Physical Characteristics
Form Factor: Hot-swappable 
Dimensions: 0.8 Height x 6.75 Width x 7.28 Depth 
Weight: 0.75 lb  
 
Cisco SPA-8XCHT1/E1 Miscellaneous
Additional Information:
Spare Product
Power 9.4W maximum
Physical Interface: RJ-45 to BNC adapter cable option
Up to 8 independent T1 or E1 ports configurable as either all T1 or all E1 only
Channelized and fractional T1/E1, clear channel E1 supported
Internal or network clocking selectable on each port
Loopback capabilities
Spare Product
Power 9.4W maximum
Physical Interface: RJ-45 to BNC adapter cable option
Up to 8 independent T1 or E1 ports configurable as either all T1 or all E1 only
Channelized and fractional T1/E1, clear channel E1 supported
Internal or network clocking selectable on each port
Loopback capabilities 
 
Cisco SPA-8XCHT1/E1 Compatibility:
Cisco 7600 Series routers
Cisco 12000 Series routers
Cisco XR 12000 Series routers
Cisco 7600 Series routers
Cisco 12000 Series routers
Cisco XR 12000 Series routers

SEA TEL INTERNATIONAL NETWORKS

Router module

 

N5K-C501OP-BF

SPA-2XOC3-POS=

N7K-M108X2-12L

SPA-8X1FE-TX-V2=

N7K-M132XP-12L

SPA-1XOC48POS/RPR=

NM2FE2W-VW

SPA-4XOC3-POS-V2=

SPA-8XCHT1/E1

SPA-2XOC3-ATM=

SPA-1X10GE-L-V2

SPA-4XOC3-POS=

SPA-4X1FE-TX-V2=

Online Inquiry